Compression Fittings / Male Connectors 3 wire 08cm) bore size

08cm) bore size

Once an upside down crown is rejected at the Secondary Crown Excluder

This Soft Start Valve is only used on WG8/10 and Legacy WGC-50 fillers

There are two Paddle Vertical Supports per assembly

The size of each Stabilizer is specific to the diameter of the can being used

Compression Fittings / Male Connectors 3 wire 08cm) bore sizeMale connectors are used with all Meheen Bottle Fillers. They thread into the top of the Fill Head Carriage and hold the stainless steel fill tubes in place. Pick the size you need based of the diameter of your fill tubes; 5 16" or 3 8". Specs: Connection Type: Tube x MPT Material: Kynar Maximum Service Temperature: 8 to 275F ( 22. 2 to 135C) Pressure Rating: 220 psi (15. 17 Bar) Thread Type: 5 16" Connector = 5 8 20, 3 8" Connector = 1 2 20