4 Bolt Plow Share for Leinbach Moldboard Plows PTO Implement Yoke interchange part

PTO Implement Yoke interchange part numbers: 35N204537

and FE35 Tractors

Commonly used on the following International cultivator models:  1-F144

If you have an early pump part number 352035R91 or Pesco Pump part number 05 1004 040-01 you MUST also order the front seal part number 355742R91

Oliver bearing part numbers - 104342A

4 Bolt Plow Share for Leinbach Moldboard Plows PTO Implement Yoke interchange partNew Old Stock 4 Bolt Plow Share for Leinbach Moldboard Plows. Commonly used on Leinbach Model 80 Single or Double Bottom Plows. Plow share is for a 14" inch plow. This share will also fit 16" inch and 18" inch plows but the total length of the share will vary compared to the original. 1st to 2nd bolt hole is 1 3 4" inch apart. 2nd to 3rd bolt hole is 5 5 8" inch apart. 3rd to 4th bolt hole is 4 3 8" inch apart. Measurement is taken from center of hole